PMLAB DIC-3D Pro Traditional DIC Strain Measurement System - Full-field Non-contact Strain Measurement

The PMLAB DIC-3D Pro system uses a non-contact optical measurement method to accurately measure the spatial three-dimensional coordinates of objects, as well as data such as displacement and strain under load. Its application range includes: object surface profile measurement (three-dimensional coordinates, morphology measurement, reverse engineering, etc.), material performance testing (Young's modulus, Poisson's ratio, elastoplasticity, etc.), vibration mode analysis testing (steady-state vibration, non-steady-state vibration), high-speed deformation testing (explosion, impact, and other high-speed tests), fatigue and fracture testing (fatigue, crack growth, etc.), residual stress analysis, biomechanics testing (blood vessels, muscles, bones), and FLC forming limit curve determination.

Measurement Principle:

The PMLAB DIC-3D system uses two cameras based on the principle of binocular stereo vision and employs a three-dimensional digital image correlation method to measure the three-dimensional morphology of the surface of the object being tested and the three-dimensional deformation field under load. The main principles are as follows: calibrate the binocular camera system using a verified calibration board to obtain the internal and external parameters of the two cameras; use correlation matching algorithms to obtain the disparity of corresponding points in the images collected by the left and right cameras, and reconstruct the three-dimensional morphology of the object's surface from the disparity data of each point in the image and the pre-obtained calibration parameters; by comparing the changes in the three-dimensional morphology of each point in the measurement area under load, obtain the full-field three-dimensional displacement distribution and strain distribution of the object being tested.

Technical Features:

• Non-contact • Small strain to large strain

• High precision • Suitable for various materials and shapes

• Full-field measurement • Suitable for objects of various sizes

• High-temperature testing • Two-dimensional and three-dimensional measurement

• High-speed testing • Video extensometer mode

System Functions:

Real-time, offline correlation calculation, automatic or manual seed point analysis

Can set correlation thresholds, search radii, iteration counts, and supports various seed point analyses

Supports manual selection of seed points and manual setting of deformation modes

Multiple shape functions available for selection: first-order shape function (suitable for small strain rates)

Second-order shape function (suitable for large strain rates), three interpolation functions available for selection: 4th, 6th, 8th order

Calculates lateral and axial linear strain

Calculates Poisson's ratio

Extensometer analysis

Calculates lateral and axial linear strain

Calculates Poisson's ratio

Displacement and various strain calculations

Combined displacement, normal, etc.

Profile

Displacement field

Various strain fields

Temporal and spatial curves

Application Fields:

Material performance testing: composite material performance testing, metal material performance testing, new flexible material performance testing, polymer material performance testing

Automotive engineering: safety collision testing, airbag design safety testing, whole vehicle vibration testing, component performance testing, aerospace, aircraft wind tunnel experimental performance testing, high-temperature aircraft shell performance testing, vibration control, auxiliary structure performance testing

Civil engineering: building material performance testing, building seismic performance testing, dam safety performance monitoring, steel structure performance testing, rocket launch tower safety detection

Ship engineering: hull structure deformation testing, aircraft carrier deck deformation monitoring

Mineral engineering: ore performance testing　

Biological engineering: bones, muscles, blood vessels, etc., bone strength testing, muscle deformation and strength testing, blood vessel strength testing

System Advantages:

1. Non-contact three-dimensional coordinate, displacement, and strain measurement

The PMLAB DIC-3D uses a non-contact optical measurement method to measure the three-dimensional deformation of the specimen's surface. By calculation, it can obtain parameters such as displacement and strain for every point on the specimen's surface without the need to install any sensors, avoiding measurement errors introduced by human factors when using traditional methods.

2. No on-site calibration required

For users with fixed measurement fields, the PMLAB DIC-3D Pro III system is introduced, which does not require on-site calibration. The system uses the PM-P portable measurement head, which is designed for specific measurement fields and ensures measurement accuracy without on-site calibration.

3. Multiple measurement modes and functions

The PMLAB DIC-3D has two measurement modes for different application environments: two-dimensional measurement mode and three-dimensional measurement mode; it can achieve: video extensometer function, FLC forming limit curve function.

4. Meets various testing environments

The PMLAB DIC-3D uses a non-contact optical full-field measurement method, requiring no installation of any sensors, suitable for high-temperature testing environments and dynamic testing environments.

5. User programmable control of the image acquisition process

The PMLAB DIC-3D provides a programmable control module for the image acquisition process according to different acquisition needs. Users can control the image acquisition process through parameters such as time, external load, temperature, and displacement, making the entire image acquisition process controllable and programmable.

6. Trigger acquisition device

The PMLAB DIC-3D uses a self-developed PM-TC trigger acquisition device to control the trigger synchronization between multiple cameras; at the same time, it supports data communication of analog and digital signals with external devices.