The days of revising drawings and renumbering bubbles are coming to an end: the new standard gives inspected characteristics a permanent identity.
Release time:
2026-10-26 17:30
Source:
A single revision to the drawing requires renumbering bubbles, redoing the characteristics list, and reassigning downstream inspections—yet the root cause isn’t a lack of diligence; it’s that inspected characteristics lack “identity,” becoming disconnected whenever the drawing changes. Drawing on eight recent publications, this article examines how new standards, QIF, and digital product passports embed characteristic identity into the digital thread.
01 What is the MBD Digital Thread
THE DIGITAL THREAD
As soon as the drawings are revised, the bill of materials is renumbered, the parts list is remade, and everything downstream has to be redone—this happens when data isn’t integrated into the core system. The scale of engineering change orders tells the whole story: at one large manufacturing company, team members process over 1,000 engineering change orders (ECOs) each month, with each change costing between €20,000 and €50,000 when hidden costs are factored in. [1] . The changes involved extend far beyond drawings: BOMs, algorithmic data, 3D geometry, and technical drawings all constitute change data, and any one of these can propagate through assembly relationships to form a change network. [1] The digital thread is precisely what ties this network together.

Figure 1: Integrated Engineering Change Management Framework: Consolidating the change information flow back into the product design system (adapted from reference [1])
02 MBC New Standard
A PERMANENT ID FOR CHARACTERISTICS
The solution is to assign a “permanent identity” to the characteristics being inspected. In May 2026, standards related to Model-Based Characteristics (MBC) were approved as national standards in the United States. The idea is to enable characteristics to travel across systems while carrying machine-readable identities (DMSC announcement, May 31, 2026; ANSI approval). This aligns with the approach of the Quality Information Framework (QIF): compared to the STEP AP242 and JT standards, QIF integrates product design information with inspection data. Semantic level woven into the same information carrier [2] , enabling feature and tolerance, as well as deviation information, to be seamlessly fed into deviation simulation and digital twin optimization.

Figure 2: Mid-surface meshing challenges in deviation modeling: A mid-surface mesh model of a sheet metal part carries QIF deviation information (adapted from reference [2]).
Identity must also be trustworthy. The metrology traceability field offers data spaces and digital trust anchors as solutions: electronic signatures based on public key infrastructure (PKI) ensure that content remains untampered; Germany’s “QI-Digital” initiative has demonstrated that linking metrology traceability with other digital solutions can yield more efficient processes; the Digital Product Passport (DPP) is one of the practical use cases for this system. [3] 。
03 Transfer of Drawing Data Along the Digital Thread
DATA ON THE MOVE
With features assigned identities, the data can be seamlessly passed along the workflow. The first stage is process planning: a web-based STEP AP242 feature recognition system identifies bosses and blind pockets on the workpiece and automatically generates CNC machining code; simulation verification confirms that the toolpaths adhere to the established machining strategy. [4] Second, change management: PLM workflows supported by large language models have been shown to reduce manual effort, improve traceability consistency, and accelerate response to changes—though human oversight remains necessary in safety-critical or semantically ambiguous scenarios. [5] 。
04 Realizing the Digital Thread Closed Loop
CLOSING THE LOOP
The final meter of the closed loop is data measurement feedback. Even legacy CNC machine tools can be integrated: a modular digital metrology architecture uses vision acquisition combined with PCA/SVD to estimate geometric features. The standard deviation of straightness for reference parts is only 0.0077–0.0080 mm, whereas for machined parts it reaches 0.3007 mm, making the deviation immediately apparent. [6] . The data foundation must also handle scale: for BOM’s deeply nested structures, the Decoupled Access Control Architecture (DHAR) keeps response latency consistently below 1.30 milliseconds. [7] 。

Figure 3: HGMP interface: Visual acquisition, OCR coordinate reading, and visualization of geometric processing results for legacy machine tools (adapted from reference [6]).
At the machine tool level, the enabling technology is the digital product passport: a framework that integrates CAD/CAM/CAE environments, QR codes, sensor data acquisition, and surface metrology compliant with ISO 25178. Alicona measurements confirm that microstructured surfaces can reliably support QR code readability and engineering traceability. [8] . Tool-side recommendations MBDVidia Export PMI along with the inspected features in QIF or STEP AP242 (already supported in Edition 3) neutral formats, and feed the inspection results back into the model to establish a measured‑vs‑designed closed loop.

Figure 4: Conceptual structure of the Machine Tool Digital Product Passport (DPP) (adapted from reference [8])

Figure 5: Physical verification of QR-associated surface structure and DPP integration: Alicona surface metrology (reproduced from reference [8])
Identity preserved, data continuous, measurements traceable—only when the inspected characteristic has a permanent identity is the closed loop truly complete.
References
[1] Integrated engineering change management framework for efficient information flow to product design systems. The International Journal of Advanced Manufacturing Technology, 2026. DOI:10.1007/s00170-025-17175-2
[2] Model-Based Definition for Non-Rigid Variation Simulation II: Feeding the Digital Twin with Data from the Quality Information Framework (QIF). Procedia CIRP, 2026. DOI:10.1016/j.procir.2026.03.158
[3] Traceability in Data Spaces: From Individual Measurements to a Digital Product Passport. Metrology, 2025. DOI:10.3390/metrology5040070
[4] Web-Based STEP AP242 Boss and Pocket Feature Recognition for Automated CNC G-Code Generation. Research Square (preprint), 2026. DOI:10.21203/rs.3.rs-9253485/v1; the final version will appear in The International Journal of Advanced Manufacturing Technology, 2026, DOI:10.1007/s00170-026-18381-2
[5] Generative PLM: Utilizing Large Language Models for Automated Engineering Change Management and Requirements Traceability: A Case Study in Smart Manufacturing. American Journal of Interdisciplinary Studies, 2026. DOI:10.63125/xbj93w89
[6] Modular digital metrology architecture for legacy CNC machines using visual acquisition and PCA implemented via SVD. The International Journal of Advanced Manufacturing Technology, 2026. DOI:10.1007/s00170-026-19190-3
[7] A Decoupled Access Control Framework for Secure and Scalable PLM Systems in Industry 4.0. Electronics, 2026. DOI:10.3390/electronics15122570
[8] Digital Product Passport for Machine Tools as an Information Core of Sustainable Manufacturing Engineering. EAI Endorsed Transactions on Digital Transformation of Industrial Processes, 2026. DOI:10.4108/dtip.12988
BOC characteristic transfer,Permanent Feature Identifier,MBC (Model-Based Characteristics),Bubble chart creation,QIF